Helmets
Every helmet on a shop wall looks protective. The three things that separate a good choice from a bad one are the certification label inside, the fit on your head, and how it sits with your goggles.
A ski helmet should be certified to a snow-sports standard. The U.S. Consumer Product Safety Commission’s helmet chart lists, for skiing, snowboarding and snow tubing, ASTM F2040 and the Snell S-98 and RS-98 standards. Helmets sold in Europe are tested to EN 1077, and many helmets sold here carry both marks. Smith, for example, lists its Code Mips helmet as certified to ASTM F 2040 and CE EN 1077:2007 Class B, and Atomic lists both marks on its Four AMID Lite.
Two points from the CPSC are worth knowing. Bicycle helmets must meet a mandatory federal standard, but snow-sports helmets meet voluntary standards, so the label is how you confirm it. And a bike helmet is not a ski helmet: the CPSC chart assigns different helmet types to different activities. If there is no snow-sports certification on the label or in the spec, put it back.
Size is the next filter. Smith’s guide says to wrap a flexible tape measure around the largest part of your head, about one inch above your eyebrows, and read it in centimetres. Each brand publishes its own size chart, and some brands, Smith included, make a round-contour fit for rounder heads with a different chart. If you fall between sizes, try both in a shop.
Then put it on and check the fit:
Buying for a child? Bring them. The CPSC advises having the child present so the helmet can be checked for fit. A helmet bought to grow into does not fit now.
This step is easy to skip. Smith says there should be no gap between the top of your goggles and the helmet, and the helmet should sit just above the goggle frame without pushing it down. A gap leaves a strip of forehead cold and exposed. A helmet that crowds the goggles pushes them onto your nose. Many helmets and goggles from the same brand are shaped to line up their vents, which also helps keep goggles clear. Try the pair together, or at least confirm the fit with the goggles you already own.
Many helmets now include Mips, a low-friction layer inside the helmet. Mips describes it as designed to move slightly in some angled impacts and redirect rotational motion away from the head, intended to reduce the risk of brain injury. Smith’s helmet guide says the layer lets the head move 10–15 mm relative to the helmet. You can spot it by a yellow Mips dot on the back of the helmet.
Our view: when two helmets fit you equally well, choose the one with a rotational-impact system. If you want Mips without paying for a premium shell, the Smith Cache Mips is a good example: a hard-shell helmet with a dial fit and both the ASTM F 2040 and EN 1077 marks. Smith also sells some Cache colorways without Mips, so check the listing. Do not choose a helmet that fits worse to get one. Keep the claims in proportion, too. The CPSC states that helmet materials have not been proven to counteract the forces believed to cause concussions, and warns against claims that a helmet can prevent them. A helmet reduces the risk of serious head injury; it does not make anyone safe at speed.
The CPSC separates single-impact helmets, whose foam crushes to absorb one crash and will not protect you again, from multiple-impact designs. A single-impact helmet must be replaced after a crash even when no damage shows. Your helmet’s instructions or certification sticker say which kind it is; if you cannot tell, treat a hard hit as the end of its life. The CPSC also lists cracks in the shell or liner, a loose shell, crushed foam, worn straps and missing pads as reasons to replace a helmet, and without manufacturer guidance suggests replacing it within 5–10 years depending on use, care and storage. Do not add stickers or attachments that did not come with the helmet; the CPSC notes they can affect how it performs.
That is also why we suggest owning a helmet after your first day or two. A rental helmet’s history is unknown to you.
For a beginner in the Pacific Northwest: an ASTM F2040 certified all-mountain helmet with adjustable vents, a dial fit system, a rotational-impact layer if it fits you well, and a shape that matches your goggles. Compare options in the helmet section of the gear catalog, and pair it with the right lens using our flat-light goggles guide.
Updated 2026-10-07. Prices, opening dates, schedules and parking rules change. Confirm them on the official page before you travel.